NOTE! This site uses cookies and similar technologies.
If you do not change browser settings, you agree to it.

logotype
i tessuti per filtri

DUST FILTERS FOR VACUUMS, SWEEPER, VENTILATION AND AIR PURIFICATION

FABRICS AND RAW MATERIALS

Filters' shape, design, size and condition of use are important elementes to know in order to select the right kind of fabrics for firtes manufactoring.
Every process of filtration is performed in a specific environment and under specific conditions of temperature, humidity, presence of chemicals agents and mechanical strenghts.

We offer exactly what suits for your application.
For all fabrics a technical data sheet or a certificate can be given.

Ceccan filters are used in a wide array of industries: Pharmaceutical, Food, Steel mills and foundries and other sectors.
Besides the use of synthetic materials and natural "standard" are used with other materials specific treatments to improve the performaces of the filter element.
Below is a list of categories by clicking on them takes you to the corresponding gallery.

 

filtri in tessuto stellari

Stellar filters

spazzatrici

Filters for sweepers

cilindricieconici

Cylindric and conic filters

nylonemonofilo
Nylon and net filters 

coprifiltri
 Cover filters

aspirazione
Filters for
suction plants
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



 ANTI - STATICS FILTRATION MEDIA

The creation of static electricity on textile filters, besides leading to serious risks to trigger an explosion or fire in same cases, can lead to a negative impact on the performance of certain processes, especially where the dusst by their nature, are already charged or may became charged by rubbing.
The electrostatic charges can accumulate and in propre conditionspotentential can rise uo to thusands of volts.
The factors that influence the phenomenon are generally:

- Low values ​​of relative humidity in the environment
- High temperatures
- High speed 'interaction
- Small size of the particles in motion

The effects of electrostatic charges are mainly the difficulty of detachment of the dust from the filter medium and the possibility of discharges with electrical arcing and ignition of explosions or fire in the presence of flammable or explosive mixtures of powders.
In order to give good antistatic properties to a filter medium should be reduced in a homogeneous way its insulating power.
A serious answer to the problem is given through the preparation of needle felts or fabrics with special intimate mixture between the synthetics and other conductive fibers.

 TETRATEX MEMBRANE

Tetratex membranes are produced from resin polymer of 100% PTFE. They are chemically inert and thermally stable up to 325°C. The filtration membranes are constituted by an average of over 100.000 pores per cm2. The membranes are thermally bonded on a range of media that include woven materials, non-woven fabrics and felts.

These high-performance laminates allow dust cake release, low pressure drop, increased airflow and high efficiency.

Tetratex is a filtration membrane surface. Acts as a primary dust cake requiring no dust cake to act as a filter aid before or during the operation.

Tetratex helps in maintaining the integrity of the support by inhibiting the penetration of dust particles and limiting the formation of the surface panel and retaining a great flow of air and a loss of load is stable.

This filter media greatly improves the performance of conventional filter materials that rely on the formation of a panel filter surface to capture fine dust particles and that can allow the migration of dust through the filter medium thus creating high emission values ​​and increasing loss of load.

The recommended solution depends on the type of problem to be solved and the environment in which the application operates, but there is no doubt that for applications that use filter media in tissue, the best available control technology for capturing fine particulates and complex is recognized to be that of PTFE membranes.

 NOMEX

Presents an amazing resistance to flame and high temperatures. Does not melt, drip nor sustain combustion air.
Applications: steel, metallurgy, foundries and steel mills.

 

TREATMENTS AND APPLICATIONS

 

Descrizione

Fibre

Vantaggi

Applicazioni

MEMBRANA
IN ePTFE
Expanded PTFE membrane on the powder side PES
PAN
PPS
PMIA
GLASS
PTFE
Greater control over emissions
improved efficiency
Cement
Energy and Waste to Energy
chemical
Agrochemical and Food
MANTES Impregnation with fluorinated resins. PP
PES
PAN
Water repellence
Best release of the panel
Suitable for sticky dust
Cement
Aluminium
Metals and Metallurgy - Ceramics - Chemical - Non-Ferrous Metals - Electroplating industry
RHYTES Impregnated with PTFE resins and fluorinated. PES
PAN
PPS
PMIA
P84®
Water / oil repellency
Best release of the panel
Suitable for sticky dust
Cement
Energy and Waste to Energy
Asphalt - Chemical - Non-Ferrous Metals
i
MANTES Impregnation with PTFE resins. PAN
PPS
PMIA
P84®
Water / oil repellency
Great release of the panel
Longer filter life
Ccement
Energy and Waste to Energy
Aluminium - Mining - Non-Ferrous Metals
NOVATES Coated with polyurethane resin.
Suitable for operating temperatures up to 140 ° C continuous.
PES
PAN
PMIA
Best filtration efficiency
Emissions are very low (less than 5 mg / Nm³)
Cement Metals and Metallurgy
asphalt
chemical
SUPER
NOVATES
Coatings in special copolymers resistant up to temperatures of 200 ° C. PPS Best filtration efficiency
Emissions are very low (less than 5 mg / Nm³)
Energy and Waste to Energy
EKU Special impregnation resistant up to 180 ° C.
Protection of the filter preventing the transfer of heat from sparks to the fiber.
PES
PAN
PPS
Increase of the resistance to spark or other incandescent particles
Extra long sleeves
Metals and Metallurgy
special Applications
AgTes Antibacterial treatment. PES

Bacteriostatic and bactericidal
Washable

Industrial vacuum cleaners

Micro Verde Microporous membrane coated with PAC foam.
PES Anti-stick treatment.
Best filtration efficiency for very fine dust and abrasive
Cement, Metals and Metallurgy

PMIA=m-aramide, PES=poliestere, PPS=poliparafenilen-solfuro, PAN=poliacrilonitrile, PP=polipropilene, P84®=polimmide, PTFE=politetrafluoretilene

 

MADE IN ITALY

Ceccan filters are 100% MADE IN ITALY.
All manufactured products are made entirely at the factory in Arre, Padova, Italy. No step of production is achieved outside of the factory.

made-in-italy

logo-ceccan-

 

 

 

 

Ceccan SRL
Via Ponte dei Ranari 2 Arre 35020 (PD) Italy
Tel. +39 049 5389419
Export dept. +39 0419638499
Fax +39 049 5310050

P. IVA IT03931760288 REA 348521
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

filtri-asp